Hy-a6h high speed automatic can sealing machine, with 6 roll heads, this machine has accurate high speed roll sealing ability, the fastest speed can reach 600 cans per minute. Its function is to drive the tank body by the lifting tank plate, and at the same time by the first and second volume output in order to act on the edge of the rolling head, and then through the volume sealing convex transport and continuous volume sealing action. Each machine is equipped with multiple safety devices to ensure high speed operation of two rewinding performance. Equipped with frequency converter device, can do no segment speed control, simplified tank type replacement design, replacement more simple, fast.

The machine features：

1. The head of the coil head and the lower lifter are designed for automatic oil feeding.

2. Accurate internal structure of roll head with low failure rate.

3. Non-contact output device can avoid the scratch of the tank body.

4. No body contact surface is treated with hard chrome of average longitude to prevent abrasion.

5. Frequency converter control is adopted, from 0 cans to the number of cans required, which can be adjusted freely.

6. Marking machine, air jet device and steam jet setting can be installed.

7. Linear conveying design for in-and-out tank mining.

8. Multiple security devices ensure safe operation of the machine and quality of roll sealing.

9. The rolling adjustment of the coil seal is attached with a scale, and the cochlear welding adjustment screw is designed on the outside of the outer table, which is more convenient for adjustment.

10. Electrical cabinets, safety Settings and components without liquid contact are all made of stainless steel.

11. After simple modification, the machine can be connected without soup.

Technical parameters

Model	HY-A6H	HY-A8H	HY-A8HL	HY-A10H
Filling head	6H	8H	8H	10H
Apply to tank diameter	202 - 401D (52 - 99 mm)	202 - 301D (52 - 74 mm)	202 - 401D (52 - 99 mm)	202 - 301D (52 - 74 mm)
Apply high pot	65 - 180 mm	65 - 180 mm	65 - 180 mm	65 - 180 mm
Capacity	up to 550 - 600 cpm	up to 700-750 cpm	up to 700-750 cpm	up to 900-950 cpm
Need horsepower	10 HP	15 HP	105HP	15 HP
Area and height required	2050 x 1050 x 1900 mm	2050 x 1050 x 1900 mm	2390 x 1450 x 2050 mm	2390 x 1450 x 2050 mm
Into the tank height	900 mm	900 mm	900 mm	900 mm
The tank height	900 mm	900 mm	900 mm	900 mm
Net weight (approx.)	2800 kgs	2900 kgs	3300 kgs	3500 kgs